No, do not close the actuator before inserting FPC in the case of FH series back flip type  connectors.Closing the actuator before inserting FPC may narrow the gap between the c...

​No.  Because the maximum operating temperature is 85°C, DF37 series is not recommended in the equipment for automotive.However, the maximum operating temperature of ​FX23 serie...

​Please mount the connector with actuator standing(open). When the FPC is not inserted and the actuator is down(close) , the springiness of the contacts will deteriorate.

Yes, please use AWG#22 wire and select contact from  DF11-22SCF, DF11-22SCFA(04), DF11-22SC and DF11-22SCA. However, they are not subject to UL.

​For automotive roof antennas.

The lock structure and series name are as follows.FH12 is front flip and vertical flip.​FH19C,FH26W,FH28,FH33(J),FH36/W,FH41,FH49,FH50,FH52,FH55M,FH62,FH63S,FH65,FH75,TF06L,TF31...

Insert Interposer by pressing on Installation Cap, then remove Installation Cap.For more information, see the IT3 design note. IT3 design guideline https://www.hirose.com/ja...

DF12 * series(Discontinued) and DF12N * series are compatible both in mating and PCB footprints. (* is a symbol representing the design differences , and blank, A, B, C etc. are...

No.  If shield wire connection is not necessary, cable shielding connection clamp is not necessary.

The cable side crimp socket is; Pin header Cable side socket /RemarksDF63M-2P-7.92DS(A) DF63-3S-3.96C /Insert crimp contacts into No.1 and No.3 cavities DF63(R)-3P-7....