HRS FAQ System
- Home
- FAQ
- Industries
- Other Industrial Equipment
- Broadcasting Equipment
FAQ
Broadcasting Equipment
Sort：
1 - 10 items (out of 21)
-
Is through-hole reflow recommended for FX18 series and FX23 series ?
Yes, through hole reflow is recommended for FX18 series and FX23 series.
-
What is the applicable AWG# for HA16PRM-3S(05)(Scheduled to be discontinued)?
Maximum size is AWG#16.
-
What is the difference between HR10 and HR10A receptacles, although they are intermatable?
The difference is the method of contact processing. 1. Method of contact processing HR10 : Machined contact HR10A : Press Contact
-
Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
The hole size is reduced to stabilize the connector to PCB and prevent connector from mis-position and rotation during mounting process. Please refer to FX18 Design Guide Line,...
-
Can 2A current be fed to each contact and can total 24A(2A x 12 pins) be fed on HR10A-10R-12P(73)?
Yes, 24A current can be fed.
-
Regarding the HR 10 A series, there is a boss (triangular pyramid recess) on the clamp fitting, is it necessary to align and tighten the locking screw (hex set screw) on this boss?
You need to tighten the clamp by aligning the screw with the recess of the clamp fitting.When a load is applied to the cable, the fitting is not caught in the screw tip and pull...
-
What is the difference between HR10A-10P-12S(73), HR10A-10P-12S(74) and HR10A-10P-12S(78)?
The difference is followings. Part number Contact plating / Shell plating HR10A-10P-12S(73) Silver / Nickel HR10A-10P-12S(74) Gold / Nickel HR10A-10P-12S(78) Gold /...
-
What is the difference between HR10A-13R-20P(73）and HR10A-13R-20P(74)?
The difference is contact plating. HR10A-13R-20P(73) : Silver HR10A-13R-20P(74) : Gold
-
What is the plug used for HR10G series receptacle?
HR10G series has receptacles only. Please use HR10 series and HR10A series plugs. However, the standard for contact plating is gold for HR10 series, silver for HR10A and HR10G...
-
What is the MF10S series jack connector ?
There are two jack connectors. (1) MF10S-WJN7C01-0200(31) : Nickel plated shell (Not Recommended for New Design) (2) MF10S-WJ7C01-0200(31) : Chrome plated shell (Schedule...
Frequently asked questions in Broadcasting Equipment
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- Is through-hole reflow recommended for FX18 series and FX23 series ?
- What is the difference between FX18-**P-0.8SV and FX18-**P-0.8SV(11) ? ** stands for number of contact.
- Is it possible to use FX18 interposer for the other board connections than parallel connection?
- What is the difference between HR10A-10R-10S(71) and HR10A-10R-10S(72) ?
Search by keyword
- Home
- FAQ
- Industries
- Other Industrial Equipment
- Broadcasting Equipment
