HRS FAQ System
- Home
- FAQ
- Industries
- Medical
- MRI/CT
FAQ
MRI/CT
Sort：
1 - 10 items (out of 27)
-
What is the difference between DF22L-2S-7.92C(26)(Scheduled to be discontinued) and DF22L-2S-7.92C(28) ?
The difference is color of housing(insulator). Part number : Color DF22L-2S-7.92C(26) : Blue(Scheduled to be discontinued) DF22L-2S-7.92C(28) : Red
-
What is the difference between FH12-**S-0.5SH(55) and FH12-**S-0.5SH(1)(98) ? ** stands for number of contact.
The difference is quantity a reel. FH12-**S-0.5SH(55) 2,000 pcsFH12-**S-0.5SH(1)(98) 500 pcs ** stands for number of contact.
-
What is the difference between ER8-***P-0.8SV-2H and ER8-***P-0.8SV-2H(10)? *** stands for number of contacts.
The difference is contact plating. ER8-***P-0.8SV-2H :0.76μm gold over 2.54μm nickel Thick plating is required for communication market. (Bellcore specification) ...
-
Is through-hole reflow recommended for FX18 series and FX23 series ?
Yes, through hole reflow is recommended for FX18 series and FX23 series.
-
Is the applicator for DF50 crimp contact the same as that for DF50K crimp contact?
No, it is different. We prepare a dedicated applicator for each crimp terminal(contact) according to the wire gauge size (AWG#). ApplicatorDF50 crimp contacts : AP105-DF50-...
-
Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
The hole size is reduced to stabilize the connector to PCB and prevent connector from mis-position and rotation during mounting process. Please refer to FX18 Design Guide Line,...
-
What features does the FX20 series have?
Please refer to the features in FX20 series catalog.
-
What is the difference among FH41-**S-0.5SH(28), FH41-**S-0.5SH(98) and FH41-**S-0.5SH(99)(Discontinued)? ** stands for number of contacts.
The difference is quantity a reel. FH41-**S-0.5SH(28) : 2,500 pcs/reel, our standard item FH41-**S-0.5SH(98) : 500 pcs/reel FH41-**S-0.5SH(99) : Discontinued and replaced ...
-
What is the correct mating method for IT3?
Insert Interposer by pressing on Installation Cap, then remove Installation Cap.For more information, see the IT3 design note. IT3 design guideline https://www.hirose.com/ja...
-
What is the difference between FX10A-***P-SV(71) and FX10A-***P-SV(91)? *** stands for number of contacts.
The difference is packaging. FX10A-***P-SV(71) : Tray FX10A-***P-SV(91) : Reel
Frequently asked questions in MRI/CT
- Is through-hole reflow recommended for FX18 series and FX23 series ?
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- Is the applicator for DF50 crimp contact the same as that for DF50K crimp contact?
- What is the difference between DF22L-2S-7.92C(26)(Scheduled to be discontinued) and DF22L-2S-7.92C(28) ?
- Is it possible to use FX18 interposer for the other board connections than parallel connection?
Search by keyword
- Home
- FAQ
- Industries
- Medical
- MRI/CT
