HRS FAQ System
- Home
- FAQ
- Industries
- Industrial Automation
- Motor Drives
FAQ
Motor Drives
Sort：
51 - 60 items (out of 81)
-
What is the peak current value of DF60 series?
Peak current value depends on the number of contacts used and the temperature. Please refer to the catalog for the details.
-
How many pieces are the ordering lot for DF11-10DP-2DSA(24)?
Ordering information; Ordering unit : piece MOQ : 40 pcs Ordering lot : Multiple of 40 tube(stick) packaging
-
What is the difference between DF60-1012PCFA and DF60-1012PCFA(07)?
The difference is rated current. Please refer to the following table.DF60-1012PCFA(07) uses higher conductive copper alloy and our standard.
-
What is the purpose of the holes on recommended PCB mounting pattern for HIF3B*-**P-2.54W? * stands for series no.. ** stands for number of contacts.
The holes are for the fixing screws, that go though from PCB rear side. If fixing screws are required, HIF3B*-**P-2.54W(88) is recommended. It is nut built-in type that can be...
-
What is CAT5e vertical modular jack connector with shield ?
It is TM21R-3C-88(51).
-
What is the difference between FX18-**P-0.8SV and FX18-**P-0.8SV(11) ? ** stands for number of contact.
The difference is packaging. FX18-**P-0.8SV : Tray FX18-**P-0.8SV(11) : Reel** stands for number of contact.
-
What is the criteria for FX23L soldering?
The criteria is;(1) Signal contact The fillet is formed and gets wet sufficiently. (2) Power contact and reinforcement metal The through hole is filled with solder firmly.
-
Does guide plate FX2B(A)-GPA include pressure block ?
Yes, FX2B(A)-GPA includes pressure block and is used with Hi-Flex connection press HHP502.
-
What is the difference between HIF3BA-26PA-2.54DSA(63) and HIF3BA-26PA-2.54DSA(72)?
The difference is gold plating thickness on contact area; HIF3BA-26PA-2.54DSA(63): 0.2μm HIF3BA-26PA-2.54DSA(72): Gold flash plating
-
What is the shielding type connector of TM5RL-88(40)?
The shielding type connector of TM5RL-88(40) is TM11R-5L-88(40)
Frequently asked questions in Motor Drives
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- Is through-hole reflow recommended for FX18 series and FX23 series ?
- What is the maximum amperes that can be applied to FX23 series 100 pins ?
- What is the replacement connector for DF6-**P-3.96C(Discontinued)? ** stands for number of contacts.
- What is the difference between FX18-**P-0.8SV and FX18-**P-0.8SV(11) ? ** stands for number of contact.
Search by keyword
- Home
- FAQ
- Industries
- Industrial Automation
- Motor Drives
