CNCs/PLCs

Sort：

1 - 10 items (out of 46)

Do you sell only screw for DH-**-CV1B? ** stands for number of contact.
We don't sell screw only for cover case DH-**-CV1B. ** stands for number of contact.
What is the difference between FH34SRJ-xxS-0.5SH(50) and FH34SRJ-xxS-0.5SH(99)? xx stands for contact number
The difference is quantity a reel. FH34SRJ-xxS-0.5SH(50):　　　5,000 pcs/reel FH34SRJ-xxS-0.5SH(99):　　　　 500 pcs/reel xx stands for number of the contacts.
Is through-hole reflow recommended for FX18 series and FX23 series ?
Yes, through hole reflow is recommended for FX18 series and FX23 series.
Do you have tensile test report for DF62 series?
It depends on the conditions. Please let us know the connector part numbers, wire manufacturer name, UL Number for wire, AWG number of wire, the location that you want to kn...
What is the inspection connector for DF37 series and DF40 series?
The connectors with "J" after the series name are connectors for the inspection jig. Example: DF40JC, DF37CJ
What is the one-action lock connector for FPC/FFC?
They are FH62 series, FH63 series and FH67 series. The difference is contact pitch and cable insert direction as follows.FH62 series : 0.25 mm horizontalFH63S series : 0.5 mm ...
Is the applicator for DF50 crimp contact the same as that for DF50K crimp contact?
No, it is different. We prepare a dedicated applicator for each crimp terminal(contact) according to the wire gauge size (AWG#). ApplicatorDF50 crimp contacts : AP105-DF50-...
Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
The hole size is reduced to stabilize the connector to PCB and prevent connector from mis-position and rotation during mounting process. Please refer to FX18 Design Guide Line,...
What features does the FX23 series have?
Please refer to the features in FX23 series catalog.
What features does the FX20 series have?
Please refer to the features in FX20 series catalog.

HRS FAQ System

FAQ

CNCs/PLCs

Frequently asked questions in CNCs/PLCs

Search by keyword

Filter by category

Frequently searched keywords

Before using this website