HRS FAQ System
- Home
- FAQ
- Industries
- Industrial Automation
- Machine Tools/Semiconductor Manufacturing Equipment/Mounters/Production Line Equipment
FAQ
Machine Tools/Semiconductor Manufacturing Equipment/Mounters/Production Line Equipment
Sort：
71 - 80 items (out of 145)
-
Regarding the HR 10 A series, there is a boss (triangular pyramid recess) on the clamp fitting, is it necessary to align and tighten the locking screw (hex set screw) on this boss?
You need to tighten the clamp by aligning the screw with the recess of the clamp fitting.When a load is applied to the cable, the fitting is not caught in the screw tip and pull...
-
What is the difference between DF13E series and DF13EA series ?
The difference is the boss. DF13E series : with boss DF13EA series : without boss
-
Do you have a rubber cap product with a string of the LF10 series?
The rubber cap with the string of the LF10 series is LF10WBR-C2.
-
Do you have a rubber cap product with a string of the LF07 series?
The rubber cap with the string of the LF07 series is LF07WBR-C2.
-
What is the difference between LF10WBR-C, LF10WBR-C(03) and LF10WBR-C(31)?
The difference is outside plating and the material of rubber for waterproof. Part number Plating Material of rubberLF10WBR-C Nickel Silicone (Black) LF10WBR-C(03) ...
-
Does HIF3FC series comply with MIL Standard?
No, HIF3FCseries does not comply with MIL standard.However HIF3B series complies with MIL standard.
-
Is cable shielding connection clamp necessary, in case of no shield wire connection for LF connector ?
No. If shield wire connection is not necessary, cable shielding connection clamp is not necessary.
-
What is cable side crimp socket for DF63M-2P-7.92DS(A) and DF63(R)-3P-7.92DS(A)?
The cable side crimp socket is; Pin header Cable side socket /RemarksDF63M-2P-7.92DS(A) DF63-3S-3.96C /Insert crimp contacts into No.1 and No.3 cavities DF63(R)-3P-7....
-
What is the difference between HR10A-10P-12S(73), HR10A-10P-12S(74) and HR10A-10P-12S(78)?
The difference is followings. Part number Contact plating / Shell plating HR10A-10P-12S(73) Silver / Nickel HR10A-10P-12S(74) Gold / Nickel HR10A-10P-12S(78) Gold /...
-
What is the difference between DF11-**DP-2DS(24) and DF11-**DP-2DS(90)? ** stands for number of contacts.
The difference is housing color.DF11-**DP-2DS(24) : BlackDF11-**DP-2DS(90) : White(90) version is not available depending on number of contact. Please check it on our website. *...
Frequently asked questions in Machine Tools/Semiconductor Manufacturing Equipment/Mounters/Production Line Equipment
- Is through-hole reflow recommended for FX18 series and FX23 series ?
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- What is the replacement connector for DF6-**P-3.96C(Discontinued)? ** stands for number of contacts.
- Is it possible to use FX18 interposer for the other board connections than parallel connection?
- What features does the FX20 series have?
Search by keyword
- Home
- FAQ
- Industries
- Industrial Automation
- Machine Tools/Semiconductor Manufacturing Equipment/Mounters/Production Line Equipment
