HRS FAQ System
FAQ
Signal/Power Supply
Sort：
71 - 80 items (out of 138)
-
Regarding the HR 10 A series, there is a boss (triangular pyramid recess) on the clamp fitting, is it necessary to align and tighten the locking screw (hex set screw) on this boss?
You need to tighten the clamp by aligning the screw with the recess of the clamp fitting.When a load is applied to the cable, the fitting is not caught in the screw tip and pull...
-
Do you have a rubber cap product with a string of the LF10 series?
The rubber cap with the string of the LF10 series is LF10WBR-C2.
-
Do you have a rubber cap product with a string of the LF07 series?
The rubber cap with the string of the LF07 series is LF07WBR-C2.
-
What is the differences between UX60SC-MB-5ST,UX60SC-MB-5ST(01),UX60SC-MB-5ST(80),UX60SC-MB-5ST(84),and UX60SC-MB-5ST(85).
Part No. Pick & place tape Mold material Packaging UX60SC-MB-5ST × Polyamide 1000pcs/reel UX60SC-MB-5ST(01) 〇 Po...
-
What is the replacement of RM12BPG-**S(Discontinued) and RM12BPG-**PH(Discontinued)? ** stands for number of contacts.
The replacement products for the discontinued products are following. Discontinued products. Replacement. RM12BPG-**S RM12BPE-**S(76)(81) RM12BPG-**PH ...
-
Does UX40A-MB-5P come with an over mold cover?
An over mold cover is not included with UX40A-MB-5P. As the catalog says, it is only connector unit and metal shield. Please prepare over mold covers.
-
How to implement CX60-24S-UNIT?
Reflow soldering is recommended for CX60-24S-UNIT, as it seems that manual soldering is difficult due to the narrow contact pitch. Please refer to the 2D drawing for the corres...
-
What is the replacement for RM15QPH-**P(Discontinued) and RM15QPH-**S(Discontinued) ? ** stands for number of contact.
The replacement connector for RM15QPH-**P(Discontinued) is RM15QPS-**P(76) or RM15QPS-**P(81) and the replacement connector for RM15QPH-**S(Discontinued) is RM15QPS-**S(76) or ...
-
The mounting style for UX60SC-MB-5S8(80) is SMT according to Web site. However, there are through holes on PCB mounting pattern. Is the flow soldering used?
The reflow soldering is used for SMT signal contacts and the lead reflow is used for metal shield. UX60SC-MB-5ST(80) is the connector that the reflow soldering is used for all ...
-
What is the difference between LF10WBR-C, LF10WBR-C(03) and LF10WBR-C(31)?
The difference is outside plating and the material of rubber for waterproof. Part number Plating Material of rubberLF10WBR-C Nickel Silicone (Black) LF10WBR-C(03) ...
Frequently asked questions in Signal/Power Supply
Search by keyword
