The difference is plating on the contact area. QR/P1-PC2A-211(12) : Nickel+gold Min. 0.2μm QR/P1-PC2A-211(15) : Nickel+palladium nickel+gold Min. 0.2μm (scheduled to be disc...

Yes, insert the probe into the hole of the cover case and bring the probe into contact with the crimp contact or the spring. See also Guideline for more information. Registrat...

Yes, please refer to guideline.Registration is necessary to see guideline.

​The difference is the sequence contact. QR/P1-PCA2B-221 : Sequence contact QR/P1-PC2B-221(12) : Not sequence contact Applicator is the same.  Applicator part number is A...

​CX60-24S-UNIT, CX60-SLDA and CX80B1-24P are not waterproof connectors. CX90MWD2-24P is waterproof(IPX8) connector.

​No, HDAB-15P(05) does not have the lock screw HD-LNA (05)(scheduled to be discontinued). Please purchase HD-LNA(05) separately.

​Yes, there is a diagrams of connectors in combination table in page 3 of HR10 series catalog. However, the plating of standard product differs between HR10 and HR10A series. ...

There is no special crimp contact extraction tool for CD series (D sub connector).  (1) How to extract crimp contact Insert a board into the lance-fixed-hole of housing about ...

No, because CE marking is not required for the connector. CE marking means compliance with European safety standards applicable to final products and devices. Therefore, CE ma...

The jack is HR25-7TJ-8S(72).Assembling jig is HR25-7TP-T01 for HR25-7TP-8P(72) and HR25-7TJ-T01 for HR25-7TJ-8S(72).Cable crimping tool HR10A-TC-02 is used for both of HR25-7TP-...