HRS FAQ System
- Home
- FAQ
- Industries
- Robots
- AGV/AMR
FAQ
AGV/AMR
Sort：
41 - 50 items (out of 87)
-
What is the maximum amperes that can be applied to FX23 series 100 pins ?
In case all of 100 pins are used for power, maximum is 62A. We recommend FX30B series 3 pin instead as maximum is 66A totally. FX30B series 3 pin is smaller than FX23 series 1...
-
What is the terminal extraction tool for GT8E series?
It is not available. Please refer to the following.
-
What is the difference between HRM(G)-300-467B-2 and HRM(G)-300-467B-2(01)?
The difference is a screw. HRM(G)-300-467B-2 : Without screw HRM(G)-300-467B-2(01) : With two screws
-
What is the applicable outer diameter of the cable for LF10WBP-12P(31)?
Applicable outer diameter is 7.1mm to 7.5mm. Please refer to the catalog.
-
What is the plug used for HR10G series receptacle?
HR10G series has receptacles only. Please use HR10 series and HR10A series plugs. However, the standard for contact plating is gold for HR10 series, silver for HR10A and HR10G...
-
What is the difference between DF60-**P-10.16DSA(27) and DF60-**P-10.16DSA(45)? ** stands for number of contacts.
The difference is color of mold. Part number : Mold color DF60-**P-10.16DSA(27) : Black DF60-**P-10.16DSA(45) : Red ** stands for number of contact.
-
Where is No.1 pin of GT8E-8P-2H(55)?
No. 1 pin position is the right edge and the numbering starts from the right, when the connector is viewed from the mating side with the board side facing down.
-
Can I buy only cover case of IX40G-A-10G-CV(7.0)?
No, we don't sell the part of connector only.
-
What is the difference between GT8-2428SCF(70), GT8-2022SCF and GT8E-2022SCF?
The difference is applicable connector series and wire size. (1) Applicable connector series GT8E series : GT8E-2022SCF GT17 series : GT8-2022SCF, GT8-2428SCF(70) (2) Wire size...
-
What is the difference between DF51K-**DP-2DSA(800) and DF51K-**DP-2DSA(805) ?
The difference is plating of contact. DF51K-**DP-2DSA(800) : Tin DF51K-**DP-2DSA(805) : Gold ** stands for number of contact.
Frequently asked questions in AGV/AMR
- What is the one-action lock connector for FPC/FFC?
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- What is the reel type part number of U.FL-R-SMT-1(01)?
- What is the difference between FH34SRJ-xxS-0.5SH(50) and FH34SRJ-xxS-0.5SH(99)? xx stands for contact number
- What is the difference between U.FL-2LP-068N1T-A-(50) and U.FL-2LP-068N1T-AC-(50)?
Search by keyword
- Home
- FAQ
- Industries
- Robots
- AGV/AMR
