HRS FAQ System
- Home
- FAQ
- Industries
- Robots
- Service Robots
FAQ
Service Robots
Sort：
21 - 30 items (out of 100)
-
What features does the FX23 series have?
Please refer to the features in FX23 series catalog.
-
What features does the FX20 series have?
Please refer to the features in FX20 series catalog.
-
What is the difference among FH41-**S-0.5SH(28), FH41-**S-0.5SH(98) and FH41-**S-0.5SH(99)(Discontinued)? ** stands for number of contacts.
The difference is quantity a reel. FH41-**S-0.5SH(28) : 2,500 pcs/reel, our standard item FH41-**S-0.5SH(98) : 500 pcs/reel FH41-**S-0.5SH(99) : Discontinued and replaced ...
-
What is the difference between DF13C-**P-1.25V(20)(Discontinued) and DF13C-**P-1.25V(21)? ** stands for number of contacts.
The difference is packaging. DF13C-**P-1.25V(20) : Tube(Discontinued) DF13C-**P-1.25V(21) : Emboss tape Because of RoHS, DF13C-**P-1.25V(20) is replaced by DF13C-**P-1....
-
Can 2A current be fed to each contact and can total 24A(2A x 12 pins) be fed on HR10A-10R-12P(73)?
Yes, 24A current can be fed.
-
What is the difference between DF13-**P-1.25V(50)(Discontinued) and DF13-**P-1.25V(76)(scheduled to be discontinued) ? ** stands for number of contacts.
The difference is RoHS. DF13-**P-1.25V(50) : RoHS compliant, Discontinued. DF13-**P-1.25V(76) : RoHS2 compliant(scheduled to be discontinued)
-
What is the pitch of screw thread used for HR30-8R-12S(31) ?
The pitch is 1mm and thread diameter is 11mm.
-
Regarding the HR 10 A series, there is a boss (triangular pyramid recess) on the clamp fitting, is it necessary to align and tighten the locking screw (hex set screw) on this boss?
You need to tighten the clamp by aligning the screw with the recess of the clamp fitting.When a load is applied to the cable, the fitting is not caught in the screw tip and pull...
-
What is the difference between DF13E series and DF13EA series ?
The difference is the boss. DF13E series : with boss DF13EA series : without boss
-
Do you have a rubber cap product with a string of the LF10 series?
The rubber cap with the string of the LF10 series is LF10WBR-C2.
Frequently asked questions in Service Robots
- What is the one-action lock connector for FPC/FFC?
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- What is the reel type part number of U.FL-R-SMT-1(01)?
- What is the difference between U.FL-2LP-068N1T-A-(50) and U.FL-2LP-068N1T-AC-(50)?
- What is the maximum amperes that can be applied to FX23 series 100 pins ?
Search by keyword
- Home
- FAQ
- Industries
- Robots
- Service Robots
