The difference is quantity a reel. FH34SRJ-xxS-0.5SH(50):　　　5,000 pcs/reel FH34SRJ-xxS-0.5SH(99):　　　　 500 pcs/reel xx stands for number of the contacts.

​Yes, through hole reflow is recommended for FX18 series and FX23 series.​​

The connectors with "J" after the series name are connectors for the inspection jig. Example: DF40JC, DF37CJ

​They are FH62 series, FH63 series and FH67 series. The difference is contact pitch and cable insert direction as follows.FH62 series : 0.25 mm horizontalFH63S series : 0.5 mm ...

The difference is the method of contact processing. 1. Method of contact processing  HR10   : Machined contact  HR10A : Press Contact

The hole size is reduced to stabilize the connector to PCB and prevent connector from mis-position and rotation during mounting process.  Please refer to FX18 Design Guide Line,...

​Please refer to the features in FX20 series catalog.

​Yes, 24A current can be fed.​

TM11R-5M2-88​(00) : 1 μm tin copper plating on dip portion,  nickel plating is 0.5 μm nickel underplating, and four directions ground plate(Discontinued). TM11R-5M2-88(01) : Ch...

You need to tighten the clamp by aligning the screw with the recess of the clamp fitting.When a load is applied to the cable, the fitting is not caught in the screw tip and pull...