HRS FAQ System
- Home
- FAQ
- Industries
- Industrial Automation
- Inverters
FAQ
Inverters
Sort：
11 - 20 items (out of 96)
-
What is the difference between DX30M-**-CV(Scheduled to be discontinued) and DX30M-**-CV(10)? ** stands for number of contacts.
The difference is the lock design. DX30M-**-CV(10) has reinforced lock. The lock metal of DX30M-**-CV(10) is seen from the side but that of DX30M-**-CV(Scheduled to be discon...
-
What is the difference between DF13-2630SCFA and DF13-2630SCFA(04)?
The difference is the plating of reel career. DF13-2630SCFA : Nickel DF13-2630SCFA(04) : Tin DF13-2630SCFA(04) is our standard. Following figure is another crimp contact fo...
-
What is the difference in the alphabets of DF11 series part number?
The difference is the boss, insulator design and metal fitting. Please refer to the below table for the details.DF11G series is scheduled to be discontinued.The replacement is ...
-
Is the applicator for DF50 crimp contact the same as that for DF50K crimp contact?
No, it is different. We prepare a dedicated applicator for each crimp terminal(contact) according to the wire gauge size (AWG#). ApplicatorDF50 crimp contacts : AP105-DF50-...
-
Can 3A current flow to DF11 series?
Yes, please use AWG#22 wire and select contact from DF11-22SCF, DF11-22SCFA(04), DF11-22SC and DF11-22SCA. However, they are not subject to UL.
-
What is the difference between DF13-xxP-1.25DSA(05),DF13-xxP-1.25DSA(25) and DF13-xxP-1.25DSA(55)?
The difference is contact plating and packaging. DF13-xxP-1.25DSA(05) : Tin plating, 100 pcs/bag DF13-xxP-1.25DSA(25) : Tin plating, 72 pcs /tube DF13-xxP-1.25DSA(55) : Gol...
-
Is it possible to reflow DF13A-xxP-1.25H(21) 2 times?
Yes, it is mentioned in column of resistance to soldering heat in specification sheet on our web page.
-
What is the difference between DF11-**DP-2DSA and DF11E-**DP-2DSA(discontinued)? ** stands for number of contacts.
The difference is connector thickness(shorter side dimension) because of thicker wall. DF11 : 5 mm Our standard.DF11E : 6 mm Reinforced wall type(discontinued).
-
Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
The hole size is reduced to stabilize the connector to PCB and prevent connector from mis-position and rotation during mounting process. Please refer to FX18 Design Guide Line,...
-
What features does the FX20 series have?
Please refer to the features in FX20 series catalog.
Frequently asked questions in Inverters
- Why is the board hole for the wider leg of MF contact A smaller than the board hole for the narrower leg of MF contact A, in case of FX18 series header and receptacle?
- Is through-hole reflow recommended for FX18 series and FX23 series ?
- What is the replacement connector for DF6-**P-3.96C(Discontinued)? ** stands for number of contacts.
- What is the difference between DF22L-2S-7.92C(26)(Scheduled to be discontinued) and DF22L-2S-7.92C(28) ?
- What is the difference between FX18-**P-0.8SV and FX18-**P-0.8SV(11) ? ** stands for number of contact.
Search by keyword
- Home
- FAQ
- Industries
- Industrial Automation
- Inverters
