HRS FAQ System
FAQ
Signal/Power Supply
Sort：
131 - 138 items (out of 138)
-
What is the applicable wire size for SR30-10R-4S(32)?
AWG#22 or larger number that means AWG#22 or thinner. If it is thicker, wire can not be inserted into the hole of contact or there is no clearance between the contact and the ...
-
What is the part number for RDED-9P (55) with inch screw ?
It is RDED-9P(4-40)(55)(Scheduled to be discontinued). RDED-9P(55) does not include screws.
-
Can HA16PRH-5S (Scheduled to be discontinued)mate with jack connector of HA216J-5P(76)(Scheduled to be discontinued)?
Yes, please refer to the HA catalog for the details.
-
What is the temperature of soldering iron tip for ZX62-B-5PA(33) ?
Soldering iron tip temperature is max. 350 degrees Celsius for 5 seconds at rework.
-
What does the final character "B" in HR10A-7R-10PB(71) stand for ?
"B" stands for dip mount type on PCB.
-
Is it possible to use the contact of QR/P6 at the power less than 1A? ** stands for number of contacts.
Yes, it is fine as it satisfies the specification.
-
What is the difference between HR10-7R-C(01)(discontinued) and HR10-7R-C ?
The difference is position of notch that decides string position. Please refer to the following figure. * HR10-7R-C * HR10-7R-C(01)(discontinued)
-
What is the difference between JR13WR-5P(71)(Discontinued) and JR13WR-5P(72)?
The difference is material of O-ring for waterproof. JR13WR-5P (71)(Discontinued) : NBR (nitrile rubber) JR13WR-5P (72) : Silicone rubber
Frequently asked questions in Signal/Power Supply
Search by keyword
